In order to take care of a garden you have to know how to choose a pole pruner. Among all the works should be noted pruning extra branches from the trees. In addition, it is often necessary to cut the shrubs, giving them a beautiful view. Only then the aesthetic look of the garden will be perfect, when a person makes some effort. And a pole priner will be much of help. This is a device that consists of an engine, a saw and a holder. It is used to cut down trees from the ground at high altitude. It is much more convenient to work from the ground than to stand on stairs with cutting tools.
Table of Contents
How to choose a pole pruner: electric or gasoline?
There is always a question: How to choose a pole pruner ? There are gasoline and electric devices. For example, the electric pole pruner is famous for being ready to use as soon as it is plugged into the socket. The engine does not make a lot of noise or emit exhaust when working.
The advantage of the electric telescopic pole pruner is also that there is no need for complicated maintenance, and the low weight and ease of operation make it possible to work with the tool even for women. However, the work of the device is always limited by the length of the cable. Extensions can be used to work further away from the power source. For domestic work, telescopic electric alignments will be an excellent solution.
At the same time, the device on a gasoline engine allows you to work more productively, because the power of the power unit – much more. Gasoline-powered high-rubber nozzles have a lot of attachments, which allow performing even the most difficult tasks when cutting branches:
- There is no binding to the power source.
- The engine works anywhere and for as long as you want.
- Utilities mainly use high-speed cutters on gasoline engines.
How to choose a pole pruner: features of modern telescopic pole pruner
Modern models emit few harmful substances into the atmosphere, and the noise from the device becomes lower. The performance of the equipment directly depends on the motor power. The higher the power, the thicker the branches can be cut. In order to cope with the work on the country estate by your own hands, it is enough to have a device with an engine power of one kilowatt.
When choosing a tool, attention is paid to the length of the tire. It can be from 20 to 50 centimeters. It all depends on the purpose for which the tool is used. For small jobs it is enough to have a length of 25 centimeters of tire. The chain is put on the bar, as on the chain saw. The cutting surface reaches those branches, which need to be cut at height.
There are pole pruners, which have telescopic or sliding barbells. The sliding bar can reach a length of 170 centimeters. The retractable mechanism can be up to 2.5 meters. Professional altimeters can have a retractable part up to 450 centimeters. To get to the far branches without a staircase, used vysotrezy with telescopic rods.
A keyless chain tensioning system is available at all heights. This means that the chain can be quickly tightened right at the workplace. All you have to do is to remove the protective cover and use a special mechanism to tension the chain.
Cutting quality depends on how well the chain is sharpened. In addition, the cutting part may vary in angle during operation. This helps to reach hard-to-reach places in the tree crown.
All modern pole pruners have an automatic chain lubrication system. And the more intense the load, the more oil is released. If the work is done at idle speed, no oil is supplied at all. In order to work a lot of time, the manufacturers have provided large tanks for high-rubber chains – up to one liter. If there is no lubrication system on the device, it is necessary to grease it manually, stopping the equipment.
Leave a Reply